Description:

This water pump is small, but it can take your DIY project to the next level!
Ever dreamed of building a submarine toy or your own aquarium?!
The USB pump can be the piece you were missing to start a brand new project!
!!! HOSE NOT INCLUDED !!!
 

Specifications:

Rated Voltage: 2.5 - 6V (1S Li-Ion/Li-Po battery)

Rated Current: 0.220A (Immersed in Water)

Rated Power: 1.5W

Wire Length: 100 cm / 39”

Maximum Lift: 60cm above the pump

Flow rate: 60L/h

Water Outlet diameter - outside: 7.5mm / 0.3”

Water Outlet diameter - inside: 4.7mm / 0.18”

Pump Diameter: 24mm / 0.95”

Pump Height: 45mm / 1.8”

Pump Width: 40mm / 1.6”

Continuous Working Lifetime: 500h

Weight: 60g

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.

Description:

Dual-axis Joystick sensor module based on potentiometer, with 2-axis analog output (X, Y), 1 button digital output (Z).
Create your own DIY controller with this Joystick module.
In addition, the module comes with mounting plates for an easier installation in your DIY project.

Specifications:

Pin Numbers: 5 (with Soldered Headers)

Output Signal: 2 Analog (X, Y-axis potentiometers) + 1 Digital (Z-switch)

Rated Voltage: 3.3V - 5V

Mounting Plate: 3 pcs assembly with screws

Total Board Dimension: 40mm x 22mm x 33mm / 1.57" x 0.87" x 1.3"(L*W*H)

Mounting Plate Dimensions: 45mm x 45mm x 2mm / 1.77" x 1.77" x 0.08"(L*W*H)

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases. 

Do not touch the product with water, as this may cause abnormal output waveform.

Description:

The uSD Card Module features a uSD socket to expand your applications capabilities and memory potential.
The modules includes also damping resistors and bypass capacitor. Since this module interfaces directly with the uSD, the MAX supply voltage is 3.3V!

Can be used in your projects for sSD Card read/write expansion, such as for MP3 Player, data storage, etc.. with any MCU/ARM control system.

Specifications:

Pin Numbers: 6 (with Soldered Headers)

Rated Input Voltage: 3.3V

Total Board Dimension: 20mm x 18mm x 15mm / 0.79" x 0.71" x 0.6"(L*W*H)

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases. 

Do not touch the product with water, as this may cause abnormal output waveform.

Package Includes:

1 x uSD expansion module

Description:

The SD Card Module features a SD socket to expand your applications capabilities and memory potential.
The modules includes also damping resistors and a LDO allowing for a wide input supply voltage (from 3.3V to 5.5V).

Can be used in your projects for SD Card read/write expansion, such as for MP3 Player, data storage, etc.. with any MCU/ARM control system.

Specifications:

Pin Numbers: 2x8

Rated Input Voltage: 3.3/5V

Total Board Dimension: 51mm x 31mm x 12mm / 2" x 1.22" x 0.47"(L*W*H)

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases. 

Do not touch the product with water, as this may cause abnormal output waveform.

Package Includes:

1 x SD expansion module

Description:

"WHITE" 130 DC brushed motor used since the old days of mini 4WD!
Motor has an 8mm long, 2mm diameter shaft. It can be used in DIY projects like RC-toys or into motorized setup.
Rated 3V with a No Load current of 0.2A.
Have a look at our Lego RC-toy to see how we used it!

Specifications:

Rated Voltage: 3 (2S Ni-Mh)

Rated Current: 0.2A (No Load)

Rated Speed: 12000RPM (No Load)

Weight: 15g

Shaft Diameter: 2mm/0.08"

Shaft Height: 8mm/0.31"

Motor Diameter: 20mm/0.8"

Motor Width: 15mm/0.6"

Motor Height: 25mm/0.98"

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases. 

Do not touch the product with water, as this may cause abnormal behavior and corrosion.

Description:

“RED” 130 DC brushed motor used since the old days of mini 4WD! Motor is provided with Fan Blade and motor mounting for easier installation in DIY projects.
Motor has an 8mm long, 2mm diameter shaft.
It can be used in DIY projects like RC-toys or into motorized setup.
Rated 3V with a No Load current of 0.2A.

Specifications:

Rated Voltage: 3 (2S Ni-Mh)

Rated Current: 0.4A (No Load)

Rated Speed: 18000RPM (No Load)

Weight: 15g

Shaft Diameter: 2mm/0.08"

Shaft Height: 8mm/0.31"

Motor Diameter: 20mm/0.8"

Motor Width: 15mm/0.6"

Motor Height: 25mm/0.98"

Blade Diameter: 60mm/2.36"

Support Mounting Hole: M2/M3

Notes:

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases. 

Do not touch the product with water, as this may cause abnormal behavior and corrosion.